Structure

Conductor Section : 1,5 mm²～120 mm² (other specifications can be adapted)
Driver : tinned copper wire, classe VDE0295/IEC60228.5
Isolation : electron beam crosslinked polyolefin copolymer
Sheath : electron beam crosslinked copolymer polyolefin, UV and ozone resistant
Sheath color : full color spectrum

Electrical properties

Nominal voltage U0/U : 0,6/1 kV AC ; 0,9/1,5 kV DC
Maximum permitted continuous voltage : 1,8 kV DC (driver/conductor, ungrounded system, circuit not loaded)
Insulation resistance : 1000 MΩ-km
Spark test : 6000 V AC (8400 In DC)
Voltage resistance : 6500 V AC pendant 5 min

Thermal properties

Rated temperature : -40°C to +120°C
Tension maximale : Ambient temperature : -40℃ ~ +90℃
Maximum temperature at conductor : 120℃ (20000h) according to IEC/EN 60216-1
Short circuit temperature : 200℃/5 sec
Thermal endurance test : According to EN 60216-2 (temperature index +120° C)
High temperature pressure test : According to EN 60811-3-1
Resistance to damp heat : According to EN 60068-2-78 with 85% humidity

Mechanical properties

Minimum bend radius : 4×OD (fixe), 5×OD (flexion)
Dynamic penetration : According to 2 PfG 1169/08.2007 Annexe F
Spread of the notch : According to 2 PfG 1169/08.2007 Annexe G
Tensile strength and elongation of insulation and sheath : According to EN 60811
Operating time : at least 25 years at 90°C (approved by TUV/UL)

Chemical properties

Ozone resistance : According to EN 50396 part 8.1.3 Method B
Weather and UV resistance : Selon HD 605/A1
Ammonia resistance
Very good resistance to oils and chemicals
High resistance to wear and robustness, abrasion resistance
Acid and alkali resistance : According to EN 60811-2-1 (oxalic acid and sodium hydroxide)
Flame retardant : according to EN 50265-2-1, IEC 60332-1, VDE 0482-332-1-2, YOUR ONE 60332-1-2
Low smoke emission : according to IEC 61034, IN 50268
Halogen-free : according to EN 50267-2-1, IEC 60754-1
Low gas corrosivity : according to EN 50267-2-2, IEC 60754-2
Benefits : it is a compound cross-linked by electron beam, UV and ozone resistant, resistant to hydrolysis, resistant to high temperatures, material does not melt or flow; it has good flexibility; it has a long lifespan, greater than 25 years at high temperatures of 90 ℃. It is suitable for all commonly used connectors.

Structure

Driver : Stranded tinned copper conductor according to DIN VDE 0295 and IEC 60228 Class 5
Isolation : Compound cross-linked by electron beam, halogen free and flame retardant
Sheath : Cross-linked by electron beam, halogen-free and flame-retardant compound, noir

Choosing the right length of solar cable

Different models of PV cables have their own characteristics and application scenarios. For specific parameters and cable application, this should be selected according to the actual needs and use of the environment. Choosing the right PV cable model can make the electrical connection of the PV system safer and more stable, and contribute to improving the efficiency of the energy production of the system.

ZMS Product Description

Solar cables are cut according to your order. Note that there may be +/- 3% difference, corresponding to the margin of error of the machine and/or cable manufacturer : we control the lengths in order to be as accurate as possible.

Advantages of packaging

The loading tray is made of distillation wood, economical and environmentally friendly.
Reasonable layout maximizes space utilization and saves costs.
Each layer is covered with a wooden lid, which helps prevent extrusion.
The inside and outside of the packaging are wrapped with moisture-proof PE film, which can achieve good moisture-proof effect.

Additional information

This conductor is halogen-free (no flame or spread of fire), with low toxic gas emission and no corrosive gas.
Note : TÜV photovoltaic cable should be kept dry and ventilated indoors when stored and placed in a dark place to protect it from moisture, sunlight or high temperatures.

Photovoltaic cable is a special cable designed for photovoltaic power generation systems, who is responsible for connecting the photovoltaic modules, inverters and other equipment as a means of transmitting power and controlling the system. Failure to use specialized cables for solar applications will affect the lifespan of the entire system.

PV cables are generally available in different designs such as TUV, PV1-F, PV1-R et H1Z2Z2-K. TUV model PV cables are products that meet European TUV certification standards for excellent weather resistance and electrical performance for residential and industrial PV power systems.

About TÜV 2PfG 1169

The TÜV model is a simple and stable photovoltaic cable that meets European TUV certification standards. TÜV cables have excellent climatic and electrical properties, as well as good resistance to bending at low temperatures and oil, and are suitable for DC connection systems for photovoltaic power plants.

Main Features

Efficient transmission : Efficient transmission of electricity reduces energy losses. This cable uses special materials and structure that help improve electricity transmission efficiency.

Stable operation : This cable has stable electrical performance, thus guaranteeing the proper functioning of the electrical system. Even in harsh conditions such as high temperatures, low or damp, the cable maintains its stable performance.

Sustainability : TÜV type solar cables are distinguished by their high durability, making them suitable for long-term outdoor use. This characteristic offers broad application prospects in solar energy production systems..

Ease of maintenance : Compared to traditional electrical cables, TÜV solar cables are easier to maintain. Thanks to their materials and special structure, these cables require fewer replacements and repairs.

Eco-friendly and energy efficient : As a clean and renewable energy source, photovoltaic solar energy meets the principles of environmental preservation and energy saving. Photovoltaic DC cables, essential for solar energy production systems, also have ecological and energy advantages.

Applications

Solar energy for the user

Small source of energy. Used for military and civilian life in remote areas without electricity, such as trays, the islands, pastoral areas, border posts, for lighting, television, radio recording, etc ;
Domestic electricity generation system on the roof of 3 has 5 kW ;
Photovoltaic water pump : solve the problem of irrigation of drinking water in deep wells in areas without electricity ;

Traffic area

Navigation lights, road/railway traffic lights, warning lights/road signals, Mikado street lights, high altitude obstacle lights, wireless telephone booths for roads/railways, unattended power supply for road crews, etc.

Communication/communications field

Unattended Solar Microwave Relay Station, fiber optic cable maintenance station, power supply system for broadcasting/communication/paging ; photovoltaic system rural telephony, small communication machine, power supply of the soldier's GPS, etc.

Oil fields, maritime and meteorological

Solar cathodic protection system for oil pipelines and tank valves, emergency and survival power supply for oil platforms, marine detection equipment, meteorological/hydrological observation equipment, etc.

Photovoltaic plants

Autonomous photovoltaic plants, complementary wind and solar power plants, various types of large parking lot charging stations, etc.

Domaine architectural

Combining solar power generation and building materials in solar buildings to achieve energy self-sufficiency in large buildings.

Custom manufacturing (OEM / ODM)

ZMS designs and produces tailor-made cables according to your technical specifications, with customization of the marking, Colors and packaging. Our products can be adapted to meet international standards (GB, IEC, BS, NFC, ASTM, FROM, etc.) and the specific requirements of each project.

Certified quality

All cables are tested before shipment and comply with CE certifications, IEC and ISO. Detailed test reports can be provided upon request to ensure the reliability and safety of your installations.

Packaging and protection

ZMS cables are carefully packaged on wooden spools, corrugated cardboard boxes or metal drums. Ends are tightly sealed with plastic wrap or BOPP to prevent moisture. Exterior marking can be personalized with waterproof materials.

Transport and delivery

We offer flexible and fast logistics solutions to more than 130 pays :

• Maritime : 20ft or 40ft containers depending on volume.
• Land : Local or regional delivery.
• Air : Option available for rush orders.

We also provide all necessary export documents : commercial invoice, packing list, certificate of origin and customs documents.

Technical support and customer service

Our engineers and advisors support you in choosing the cables best suited to your installations. We offer comprehensive consulting services, including technical assistance and project management, to ensure every step of your order is covered professionally.

Services d’installation

ZMS offers two options for your electrical projects :

• Option A (led by ZMS) : Sending engineers and a supervision team to site to provide technical advice, installers and final tests. Travel expenses, accommodation, per diem and translation are to be expected.
• Option B (local subcontracting) : Collaboration with qualified local companies for installation, with technical training, On-site supervision and compliance verification provided by ZMS.