H1Z2Z2-K solar cable

Photovoltaic cable H1Z2Z2-K

Nom : Photovoltaic cable
Product model : H1Z2Z2-K
Application : Driver, Driver and earth between the photovoltaic energy production system.
Structure : driver + isolation + sheath
Number of drivers : Monoconductor / Multiconductor
Conductor Section : 1,5 mm²-185 mm² (Other specifications may be personalized).
Driver : Multibrian tinned copper wire in accordance with the EN60228.5 standard.
Isolation : Insulating material in irradiated reticulated polyolefin without halogen and low smoke.
Sheath material : irradiated crossroads, without halogen and with low smoke, UV resistant and environmental protection.
Insulation color : noir (Other colors available on request).
Sheath color : black/red/(Other colors can be personalized).

Technical characteristics

Nominal cable voltage : AC U0/U=0,6/1kV ; DC 1,5/1,5kV
Test voltage : 6500V, 50HZ, 5 minutes.
Rated temperature : From -45 ° C to 125 ° C ; -45℉ to +257 ℉.
Ambient temperature : -40°C to +90°C. -40℉ to +194 ℉.
Lifetime : 25 ans (approved by TUV/UL).
Short circuit temperature : 280℃, +536℉.
Radius of curvature : Installation fixe >4x ; Installation mobile >5x.

Materials/standards properties

Fire performance : IN 60332-1-2:2004.
Smoke broadcast : IEC 61034 ; Minimum light transmission of 60%.
Low fire load : FROM 51900.
Certification : EN50618 : 2014.
Application standard : EN50618 : 2014

Section of your solar wire for photovoltaic panels

The section of a cable corresponds to the diameter of the copper soul intended to drive electricity: It is expressed in mm², which corresponds to its surface.

To make a safe and secure solar installation, It is necessary to choose the right section. This depends on the total current of your solar panels and the return cable length- (rouge + noir).

You will find the current of your solar panel on the technical sheet or on the back of the panel noted :

Example : A solar installation is equipped with 2 300W panels each delivering 10A current and 12m of round-trip cable. The total installation current is 20A if they are plugged in parallel. We will therefore choose a cable section of 6mm² which can support 21A maximum for this length.

Choosing the right length of solar cable

Model numbers and PV cable letters correspond to different performance specifications and characteristics. “H” means fire resistance, while “Z” means flame delayer. Understanding the meaning of these letters, We can better choose the right cables for our photovoltaic system. In your installation, To limit distance and have smaller sections, You have to optimize the length of your cables in your layout, go to the shortest. This will allow you to save weight and budget, But it is also important to avoid a voltage drop or a warm -up of the cables linked to a length too long or too short.

In general, During the selection process, we owe Choose PV cable products appropriate according to our real needs and environmental conditions.

About H1Z2Z2

Photovoltaic cable is a special cable designed for photovoltaic power generation systems, who is responsible for connecting the photovoltaic modules, inverters and other equipment as a means of transmitting power and controlling the system. Failure to use specialized cables for solar applications will affect the lifespan of the entire system.

PV cables are generally available in different designs such as TUV, PV1-F, PV1-R et H1Z2Z2-K. The H1Z2Z2-K model of the PV cable is an fireproof model with excellent fireproof properties and is suitable for photovoltaic energy production systems that require high safety performance.

The H1Z2Z2-K model is a PV solar cable of tension 1500V , a photovoltaic cable, A DC connection cable of panel of the new EN50618 standard with TUV certification, which maintains the logistical performance unchanged on the basis of the original PV1-F, and optimizes and improves electrical performance a lot, This provides a more appropriate DC connection cable for large -scale inverters on the market.

H1Z2Z2-K is a photovoltaic cable, with a photovoltaic solar system used in communications, electrical energy, Meteorology, radio and television, Navigation coordinate indicators, The railways, photovoltaic power plants and other areas of the energy supply company. It can also be used in the desert, where the temperature difference between day and night is important, on the coast, where there is salt fog and humidity, as well as on the sets, where the influence is strong.

ZMS Cable Products Description

The H1Z2Z2-K cables made by ZMS are typical of the high quality of most photovoltaic cables.

ZMS Cables offers a complete supply service, mainly to distributors and suppliers around the world. This service includes consulting services, purchasing services, transportation services and after-sales services.

H1Z2Z2-K solar cable for interconnection within photovoltaic systems such as solar panels. Suitable for fixed installations inside and outside the conduits or systems, But not to the installations with direct burial. Our solar cables are UV resistant in accordance with the BS standard in 50396, UV resistant in accordance with UV HD protection 605 / A1 and tested in terms of sustainability in accordance with the standard 60216. For installations where fire, smoke emissions and toxic fumes constitute a potential risk for life and equipment.

The maximum use temperature is 70 ° C (isolation pvc I or) or 90 ° C ( isolation XLPE) and the voltage applied is 600V or 1000V.

H1Z2Z2-K solar cables have better resistance to UV and corrosion and can support high temperatures and humidity ; They have better oil resistance, acidic, Alkali and abrasion ; They are late flame, with low smoke and halogen -free.

Solar cables are cut according to your order. Note that there may be +/- 3% difference, corresponding to the margin of error of the machine and/or cable manufacturer : we control the lengths in order to be as accurate as possible.

Custom manufacturing (OEM / ODM)

ZMS designs and produces tailor-made cables according to your technical specifications, with customization of the marking, Colors and packaging. Our products can be adapted to meet international standards (GB, IEC, BS, NFC, ASTM, FROM, etc.) and the specific requirements of each project.

Certified quality

All cables are tested before shipment and comply with CE certifications, IEC and ISO. Detailed test reports can be provided upon request to ensure the reliability and safety of your installations.

Packaging and protection

ZMS cables are carefully packaged on wooden spools, corrugated cardboard boxes or metal drums. Ends are tightly sealed with plastic wrap or BOPP to prevent moisture. Exterior marking can be personalized with waterproof materials.

Transport and delivery

We offer flexible and fast logistics solutions to more than 130 pays :

• Maritime : 20ft or 40ft containers depending on volume.
• Land : Local or regional delivery.
• Air : Option available for rush orders.

We also provide all necessary export documents : commercial invoice, packing list, certificate of origin and customs documents.

Technical support and customer service

Our engineers and advisors support you in choosing the cables best suited to your installations. We offer comprehensive consulting services, including technical assistance and project management, to ensure every step of your order is covered professionally.

Services d’installation

ZMS offers two options for your electrical projects :

• Option A (led by ZMS) : Sending engineers and a supervision team to site to provide technical advice, installers and final tests. Travel expenses, accommodation, per diem and translation are to be expected.
• Option B (local subcontracting) : Collaboration with qualified local companies for installation, with technical training, On-site supervision and compliance verification provided by ZMS.