Optical fibers are the main lines that connect the end devices of our network. Optical fibers are mainly made of glass fibers, that may need to be cut when installing optical fibers. The cutting process creates fiber fragments, which are very small and sharp. If they are not protected, they can get into the eyes or body. This poses a threat to the personal safety of the installer.
Preparation for the installation of the Fhand
Avant Installation of optical fiber, Installation equipment and installer protection installations must be prepared to guarantee the smooth running of the installation process and avoid accidents as far as possible.
It is essential that the installation equipment is fully inspected and prepared. This includes ensuring that all installation equipment is in good working order and that necessary maintenance and overhauls are carried out..
Secondly, it is also important to properly prepare the protective equipment of the installers. Installers must wear personal protective equipment (EPI) compliant with safety standards, such as helmets, glasses and earplugs, to protect against accidental injury.
Heat-resistant gloves and flame-retardant clothing should be worn during operations such as high-temperature melting and wire stripping, to avoid skin lesions due to heat and sparks.
Installation material
The main installation equipment includes optical fibers, connectors, Episseurs by fusion, Optical fiber naked, Cutting knives, etc.
Optical fiber connection material : Make sure that the optical fiber connection equipment is intact and has the necessary connection connectors and accessories.
Test Instruments : Prepare the optical fiber test instruments, Including the optical wattmeter, Optical attenuator, etc., in order to guarantee the quality of the connection of optical fibers and the performance of the transmission of signals.
Tools : Prepare the appropriate tools, such as optical fiber stripping pliers, the tweezers, cleaning rods, etc., in order to carry out stripping work, cleaning and connecting optical fibers.
Optical fiber protection sleeve : prepare an optical fiber protective sleeve to protect the optical fiber connection part from the influence and damage of the external environment.
Power supply and lighting equipment : ensure that the power supply and lighting equipment are sufficient to provide adequate power and light to keep the workplace bright and safe.
Protection Personnelle
The main protective measures for installers are wearing glasses, gloves, combinations, helmets, respiratory protective equipment and ear plugs. As far as possible
Safety helmets : All staff members must wear security helmets in accordance with safety standards to protect the head against possible injuries due to collisions.
Protective glasses : Staff must wear protective glasses to protect their eyes from debris or dust generated during stripping of optical fibers.
Gloves : use wear-resistant, non-slip gloves to protect your hands from sharp tools and punctures caused by optical fiber ends.
Workwear : wear work clothing that meets safety requirements so that staff are comfortable, flexible and has the necessary protection during the work process.
Respiratory protection : in work environments where dust or harmful gases may be generated, personnel must wear appropriate respiratory protective equipment to avoid inhalation of harmful substances.
Earplugs or earmuffs : in noisy work environments, staff should wear earplugs or earmuffs to protect against hearing damage.
Operating procedure Shour Dec Fibres Optics
Inspection and Prepair Avant l’installation
Before installing optical fiber, it is essential to carefully inspect the cable, installation equipment and installation environment. The purpose of this exercise is to ensure that the installation process goes smoothly and to minimize potential problems and risks..
First of all, it is important to carry out a thorough inspection of the fiber itself. This includes checking the appearance and texture of the fiber optic cable to ensure that it does not show any signs of damage or wear.
The length and gauge of the fiber optic cable should also be checked to ensure it meets the installation requirements, to ensure that the fiber is available and suitable for its intended use.
Layout and Cconnections of Lignes to Fibres Optics
When installing fiber optic lines, care should be taken to avoid excessive angles, because they increase fiber loss and signal attenuation.
Try to choose a road with a large angle shaped like “8”. This shape of the route can effectively reduce the bending degree of the optical fiber, reduce loss and interference in the signal transmission process.
During the login process, you need to ensure that the surface of the optical fiber is clean and free from dust, any tiny dust or impurities that may affect the transmission quality of optical signals, in order to prevent the connection of information from being caused by interference in the data transmission process.
Installation et Mice one Sequipment service
When using fiber optic installation equipment, Be sure to respect the safety instructions and technical specifications. Follow the correct use procedures. To guarantee the normal operation of the equipment and the stable signal transmission.
Connection of optical fiber equipment according to the equipment connection requirements, Connect the optical fiber correctly and the equipment, And perform the necessary checks and tests.
Adjusting the equipment parameters Adjust the settings and equipment settings according to the actual situation in order to guarantee the performance and stability of the optical system system.
Specifications of Sjunction
Security of Mmaterial
To ensure the smooth running of the optical fiber fusion splicing process, first you need to prepare the appropriate fiber optic cable. Before performing fusion splicing, use a wire stripper to strip the outer jacket of the optical fiber to expose the inner optical fiber.
Particular attention should be paid to the fact that optical fibers are very fragile and must be handled with care to avoid damage..
To reduce the abrasion to which the fiber is subjected, it is possible to fill it with a compatible lubricant, which reduces friction on the fiber and decreases damage that can occur during the fusion splicing process.
Ensure the lubricant is compatible with the fiber and fusion equipment to ensure fusion quality and connection stability.
Equipment safety
During the’using a fusion splicer for splicing optical fibers, a series of preparations must be carried out to ensure the splicing operation goes smoothly.
When using a fusion splicer for optical fiber splicing, the optical fiber must be cut to the correct length, then spliced.
During the fusion splicing operation, You must carefully adjust the machine settings, such as temperature, the pressure, etc. in order to guarantee the accuracy and stability of the fusion splicing process. We must also ensure that the heart and sheath of fiber optics are aligned.
Specification Openalty
Take into account the effect of temperature on optical fiber when installing fiber optics. Reduce the effect of dilation to high temperature and low -temperature contraction on optical fiber.
Disconnect the light source when checking the optical fiber to prevent the light source from damaging the installer's eyes. It is also recommended to wear protective glasses when installing optical fibers.
Optical fiber must be placed in a special chute to prevent it from being crushed or hit.