PV1-F solar cable

Technical designation : PV1-F
Application : Double insulation electronic cable, reticulated by electron beam, For photovoltaic energy production.

Structure

Conductor Section : 1,5 mm²～120 mm² (other specifications can be adapted)
Driver : Multibrian tinned copper wire, Compliant with standard 0295/IEC60228, category 5
Number of drivers : Monoconductor / Multiconductor
Isolation : Polyolefine copolymer reticulated by beam of TUV2PFG/1169 electron beam, UL4703.
Sheath material : electron beam crosslinked copolymer polyolefin.
Sheath color : noir (Other colors available on request).
Insulation color : black/red/(Other colors on request).
Tension nominale : V de 600/1000 V AC, 1800 V DC Driver / driver
Tension maximale admissible :
DC : driver / driver 1,8 kV ; driver / Terre 0,9 kV
AC : driver / driver 1 kV ; driver / Terre 0,7 kV
Trois phases : driver / driver 1,2 kV
Test voltage : 6,5KV, 50HZ, 5 minutes.
Temperature scale : -45° C + 125℃ ; -45℉ to + 257℉ ;
Temperature difference : -40 ° C + 90 ° C ; -40℉ to + 194℉ ;
Maximum driver temperature : + 120°C
Short circuit temperature : 280 ° C, +536 ℉ ; (short-circuit duration until 5 s)
Radius of curvature : Minimum bending radius of 10x Ø cable Ø cable, Fixed installation 4x cable Ø
Installation method : Pipe installation, Pose of shallow grooves, Placement of cables, tunnel, mezzanine installation, Installation of supported air cables, Placement of hanging air cables, etc.
Cable performance : The cables are resistant to humidity and heat, at high and low temperatures, to acids and alkalis, with ozone, ultraviolet, flame delayers and other properties.

Materials/standards properties

Fire resistance : IEC 60332-1.
Smoke broadcast : IEC 61034 ; IN 50268-2.
Low fire load : FROM 51900.
Approval : TUV 2PfG 1169/08.2007 PV1-F.
Ozone resistance : IEC 60811-2-1.
Gas corrosive emission : IN 50267-2-2
Operating time : at least 25 years at 90°C(approved by TUV/UL).
Guarantee : 3 Ans

Choosing the right length of solar cable

For specific parameters and cable application, this should be selected according to the actual needs and use of the environment.

ZMS Product Description

Solar cables are cut according to your order. Note that there may be +/- 3% difference, corresponding to the margin of error of the machine and/or cable manufacturer : we control the lengths in order to be as accurate as possible.

Characteristics and advantages of the manufacturer of ZMS PV1-F

ZMS uses a tinned copper driver without high quality oxygen, This driver provides superior electrical conductivity, The retication of insulation materials and sheath materials by radiation of the high -energy electron accelerator plays a reliable role in insulation properties and mechanical properties.

The PV1-F cables made by ZMS are typical of the high quality of most photovoltaic cables.

ZMS PV1-F photovoltaic cable must be reasonably wrapped in order to prevent it from being damaged or contaminated. The packaging method must comply with the requirements of local regulations and the standards in force at the delivery location.

ZMS Cables offers a full supply service, mainly to distributors and suppliers around the world. This service includes consulting services, purchasing services, transportation services and after-sales services.

Additional information

This conductor is halogen-free (no flame or spread of fire), with low toxic gas emission and no corrosive gas.

Note : The PV1-F photovoltaic cable must be kept dry and ventilated inside when stored and placed in a place sheltered from light to protect it from humidity, sunlight or high temperatures.

About PV1-F

The PV1-F PV cable is a general use cable which has good weather resistance, good resistance to high temperatures, good resistance to friction and other characteristics. It has a long service life and is suitable for the electrical connection of all types of photovoltaic energy production systems.

PV1-F is one of the types of photovoltaic cables most common, 1 Indicates the type of cable, that is to say the cable voltage level of 0.6/1KV. PV is the abbreviation of English photovoltaic, which means photovoltaic ; F refers to the use of the fifth type of driver, Which generally means that cable has better mechanical and electrical properties, a similar model expression : H05VV-F and so on. PV1-F 1x4mm2 in the second 1 is a nucleus, unipolar meaning ; 4mm2, 6mm2, 8mm2 signify a photovoltaic cable for a transverse section of driver 4 Square millimeters, 6 Square millimeters, 8 Square millimeters. The applicable voltage level is AC 600/1000V, DC 900/1800V.

This type of photovoltaic cable has a wide range of applications and is mainly used in the fields of communication of basic stations, factories power supply, meteorology, radio and television, Navigation coordinate indicators, railways, Photovoltaic power plants, solar panel systems, Wind energy production systems, Wind power plants at sea, etc. One of the criteria for assessing the quality of PV1-F is the eccentricity of the transversal section. The lower the eccentricity, The more stable the quality of the cable.

Main characteristics

High voltage capacity : PV1-F photovoltaic cables are generally sized for 600V DC and are able to support tension levels higher than one in solar panel systems.

Resistance to high temperatures : Due to the solar radiation and the operating principle of solar panels, The temperature in the solar panel system is very high. PV1-F photovoltaic cables generally have a nominal temperature of 90 ° C and can be used for a long period in environments at high temperature without aging or damage.

Good sustainability : PV1-F photovoltaic cables are designed with special materials and processes, which can be used for a long time in wet environments, at high temperature and difficult, and are not easy to age and damage, which gives them a long lifespan.

Easy to install : The PV1-F photovoltaic cable is light, flexible, Easy to fold and install, and has good fireproof properties, which will not cause fire or other security accidents when using it.

High security : The PV1-F photovoltaic cable is made from environmentally friendly materials and meets the standards applicable to cables, which makes him sure and reliable.

Custom manufacturing (OEM / ODM)

ZMS designs and produces tailor-made cables according to your technical specifications, with customization of the marking, Colors and packaging. Our products can be adapted to meet international standards (GB, IEC, BS, NFC, ASTM, FROM, etc.) and the specific requirements of each project.

Certified quality

All cables are tested before shipment and comply with CE certifications, IEC and ISO. Detailed test reports can be provided upon request to ensure the reliability and safety of your installations.

Packaging and protection

ZMS cables are carefully packaged on wooden spools, corrugated cardboard boxes or metal drums. Ends are tightly sealed with plastic wrap or BOPP to prevent moisture. Exterior marking can be personalized with waterproof materials.

Transport and delivery

We offer flexible and fast logistics solutions to more than 130 pays :

• Maritime : 20ft or 40ft containers depending on volume.
• Land : Local or regional delivery.
• Air : Option available for rush orders.

We also provide all necessary export documents : commercial invoice, packing list, certificate of origin and customs documents.

Technical support and customer service

Our engineers and advisors support you in choosing the cables best suited to your installations. We offer comprehensive consulting services, including technical assistance and project management, to ensure every step of your order is covered professionally.

Services d’installation

ZMS offers two options for your electrical projects :

• Option A (led by ZMS) : Sending engineers and a supervision team to site to provide technical advice, installers and final tests. Travel expenses, accommodation, per diem and translation are to be expected.
• Option B (local subcontracting) : Collaboration with qualified local companies for installation, with technical training, On-site supervision and compliance verification provided by ZMS.