XLPE and PVC are materials commonly used for cable insulation. They have good insulating properties and are resistant to aging and abrasion. They are suitable for air installations, underground and submarines. Cables are widely used in electrical networks, transport and other areas.
XLPE/PVC cables of ZMS Cable have good electric insulation thanks to a scientifically rigorous manufacturing process.
They have been tested by many organizations. They comply with IEC standards, ASTM, GB, etc.
Our XLPE cables are coated with a semiconductor adhesive on the outer surface of the soul of the wire. This avoids the corona effect and free discharges. There is a good surplus between the soul of the thread and the insulation.
Fleurier material is added when manufacturing PVC. Improve fireproofing and flame resistance. Use an ester of phosphate as plasticizer. Improve low temperature resistance of the cable.
ZMS Cable manufactures all types of isolated cables. Products comply with BS standards 6195, Bs one 50525-2-21，Bs one 50525-3-21.
If the products below do not meet your needs. You can send us the size of the product, the driver, insulation material and other information you need. Our company supports cable customization and we think we can meet your needs.
ISOLE XLPE cable
The XLPE cable has good electrical performance and good heat resistance. Large transmission capacity, light structure, easy to fold, Easy to install and install, insensitive to height differences. Continuous development of the areas of high voltage and ultra-high tension.
Structure:Copper drivers are generally used, with insulation, shielding and sheath. The insulating layer is XLPE.
Standard：IEC 60840，IEC 60502-2，BS 5467，GB/T 12706-2008
| Conductor Section(mm²) | Driver diameter(mm) | Epaisseur de l'isolation(mm) | Outside diameter of the cable(mm) | Calculated DC Resistance at 20℃(Ω/km) |
|---|---|---|---|---|
| 95 | 11.6 | 10.5 | 45 | 0.246 |
| 185 | 16.2 | 10.5 | 50 | 0.127 |
| 300 | 20.6 | 10.5 | 54 | 0.0782 |
| 630 | 30 | 10.5 | 68 | 0.0398 |
| 800 | 34 | 10.5 | 72 | 0.0328 |
| Conductor Section(mm²) | Driver diameter(mm) | Epaisseur de l'isolation(mm) | Outside diameter of the cable(mm) | Calculated DC Resistance at 20℃(Ω/km) |
|---|---|---|---|---|
| 50 | 8.3 | 10.5 | 83 | 0.493 |
| 95 | 11.6 | 10.5 | 98 | 0.247 |
| 185 | 16.2 | 10.5 | 101 | 0.128 |
| 240 | 18.4 | 10.5 | 106 | 0.0977 |
| 300 | 20.6 | 10.5 | 111 | 0.0786 |
Precautions
1. The maximum working temperature is 90 ℃.
2. The ambient temperature is not less than 0 ℃ when installing.
3. The minimum radius of curvature of a single nucleus is to 15 times the diameter, and the minimum radius of curvature of three nuclei is 12 times the diameter.
PVC isolated cable
The PVC, known as polyvinyl chloride, is a type of current cable, Made of polyvinyl chloride and with excellent insulation and corrosion resistance properties. PVC cables are widely used in construction, industry, energy and communications. Compared to other types of cables, PVC cable is an economic choice due to its relatively low manufacturing cost.
Structure：Copper drivers are generally used, with insulation, shielding and sheath. The insulating layer is PVC.
Standard：IEC 60840，IEC 60502-2，BS 5467，GB/T 12706-2008
| Number of cores × section (mm²) | Outside diameter of the cable(mm) | Weight(kg/km) | Calculated DC Resistance at 20℃(Ω/km) | Résistance d'isolation minimale à 70°C(Ω/km) |
|---|---|---|---|---|
| 2×0.75 | 7.2 | 61 | 24.5 | 0.012 |
| 2×1.5 | 8.4 | 90 | 12.1 | 0.011 |
| 2×2.5 | 10.2 | 135 | 7.41 | 0.009 |
| 7×0.75 | 9.4 | 125 | 24.5 | 0.012 |
| 7×1.5 | 11.3 | 201 | 12.1 | 0.011 |
Precautions
1. The maximum working temperature is 60 ℃.
2. The ambient temperature is not less than 0 ℃ when installing.
3. The minimum curvature of a single nucleus is to 5 times the diameter.
ZMS company service
Soverproduction service
ZMS has a wide range of cables and conductors. We provide thoughtful services and professional project solutions to everyone who needs them.
Squality certification services
ZMS cables are manufactured in accordance with GB standards, IEC, BS, NFC, ASTM, DIN and other international standards. Our technical team can customize cable products that meet your requirements based on your needs.
Sprofessional customer service
ZMS provides free professional consultation services to provide you with one-stop project solution services and rapid product delivery solutions.
Sdelivery and shipping services
ZMS provides high quality cables, but also good delivery solutions. While ensuring the safety of product delivery, we provide the best packaging and transportation solutions, thereby significantly reducing customers' transportation costs.
Epackaging of ZMS
ZMS cables are packaged in wooden spools, corrugated cardboard boxes and reels. Cable ends are sealed with BOPP self-adhesive tape and a non-hygroscopic sealing cap to protect cable ends from moisture. We can print the required markings on the exterior of the drum using a waterproof material, according to customer requirements.
